3F LEM HT Wide
Wide distribution with rectangular shape.
Code
Item
Absorbed
power (W)
Output
flux (lm)
CCT
(K)
CRI
Dimensions
L x A x H
IP
ON/OFF electronic wiring 230V‑50/60Hz
59026
3F LEM 2 HT LED 60 CR AMPIO
68
10615
4000
>80
470x542x129
65
59027
3F LEM 3 HT LED 90 CR AMPIO
102
15922
4000
>80
657x542x129
65
59028
3F LEM 4 HT LED 120 CR AMPIO
136
21230
4000
>80
757x542x129
65
59030
3F LEM 5 HT LED 150 CR AMPIO
170
26537
4000
>80
952x542x129
65
3F LEM HT Medium
Medium distribution with square shape.
Code
Item
Absorbed
power (W)
Output
flux (lm)
CCT
(K)
CRI
Dimensions
L x A x H
IP
ON/OFF electronic wiring 230V‑50/60Hz
59039
3F LEM 4 HT LED 120 CR MEDIO
136
21725
4000
>80
757x542x129
65
59041
3F LEM 5 HT LED 150 CR MEDIO
170
27156
4000
>80
952x542x129
65
3F LEM HT Concentrated
Concentrated elliptical distribution.
Code
Item
Absorbed
power (W)
Output
flux (lm)
CCT
(K)
CRI
Dimensions
L x A x H
IP
ON/OFF electronic wiring 230V‑50/60Hz
59032
3F LEM 2 HT LED 60 CR CONC
68
10863
4000
>80
470x542x129
65
59033
3F LEM 3 HT LED 90 CR CONC
102
16294
4000
>80
657x542x129
65
59034
3F LEM 4 HT LED 120 CR CONC
136
21725
4000
>80
757x542x129
65
Construction characteristics
Illuminotechnical characteristicsWide, medium, concentrated symmetric elliptical distribution.
Lifetime (L93/B10): 30000 h. (tq+25°C)
Lifetime (L90/B10): 50000 h. (tq+25°C)
Lifetime (L85/B10): 80000 h. (tq+25°C)
Lifetime (L80/B10): 100000 h. (tq+25°C)
Luminous flux at +70°C: ‑13.5%.
Photobiological safety in compliance with IEC/TR 62778: RG0 risk exempt, (IEC 62471).
Mechanical characteristicsPassive modular heatsinks in die‑casted aluminium, painted in white colour.
To optimize the thermal management of the LED module, the heatsinks are oversized and provided with self‑cleaning of cooling fins.
Wiring body in aluminium and galvanised steel anchored solidly to the sinks and thermally separated.
3F Lens lenses with high luminous efficiency, transparent polycarbonate, fixed to the LED modules.
Fixing brackets in stainless steel.
Electrical characteristicsIn compliance with EN 60598‑1.
Compliance with the EN 60598‑2‑22 standard for power supply from a centralised CPSS emergency system must be verified in the technical data sheets of each individual device on our website.
Quick connection in polycarbonate with M20x1,5 cable gland, to access the terminal block positioned on a removable runner.
Power unit positioned on a separate compartment by the LED module to ensure optimum temperatures of cabling components, to be inspectable and maintainable.
Source characteristics
- Linear LED modules.
- Colour initial tolerance (MacAdam): SDCM 3.
On request
- different power levels, colour rendering indices and colour temperatures
- double quick connection
- wiring: twin‑circuit, dimmable, CLO
- linear LED modules, with special protection against aggressive chemically‑volatile substances, for standard LED technology
- HACCP versions for use in the food industry
Applications
Ambient temperature from ‑30°C to +70°C.
Dry, dusty indoor environments, subject to occasional water splashes.
Commercial, industrial and sporting environments (with no high‑flying balls), as well as warehouses.
Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with extreme temperature changes), use luminaires with polycarbonate lenses.
Brackets for mounting of luminaire on ceiling or on bus ducts, stainless steel.
Code
Item
A0652
Pair of brack. ceiling instal. 3F LEM
Please note: these brackets do NOT provide free orientation of the luminaire. To allow free orientation, accessories A0651+A0632 must be installed.
Brackets for ceiling mounting, in hot‑galvanised steel painted in white polyester.
The bracket A0632 allows the luminaire to be ceiling mounted without the possibility to rotate it.
To allow free orientation, both accessories (A0651+A0632) must be installed.
Brackets for wall mounting, in in hot‑galvanised steel painted in white polyester.
The bracket A0654 allows the luminaire to be wall mounted without the possibility to rotate it.
To allow free orientation, both accessories (A0651+A0654) must be installed.
Additional bracket that, combined with the A0654 or A0632 accessories, makes it possible for the luminaires to be oriented on the ceiling or the wall, in hot‑galvanised steel painted in white polyester.
This accessory must ALWAYS be used with one of the following codes: A0632 ‑ A0654.
Brackets for rotating luminaries mounted on ceilings or on bus ducts.
Dust covers for food processing areas in white‑painted galvanised steel.
Code
Item
A0728
Cover for food appl. 3F LEM 1
For a LEM 3, for example, 3 pcs of the cod. A0733 must be ordered.
Not available for the 1+1 version.
Note: the maximum ambient operating temperatures of the fixtures decrease by 10°C in all families, except for the High Output versions in which the reduction is 5°C.
The reduction in the luminous flux emitted is equal to 3% in all models in the range.
Snap hooks clips for chain suspension, galvanised steel.
Code
Item
A0653
Pair of fixing carab.for chain instal.
Glass with gasket to protect the louvre compartment from dust and noxious fumes.
Recommended for use in very dirty environments or in which aggressive chemical agents are used.
Anti‑fall safety cable Ø 2 mm for fastening the body to the building structure.
Code
Item
A0242
15SS galvanized steel cable coil 100m
The pack contains 100 metres.A0243
15BF galvanized steel cable coil 500m
The pack contains 500 metres.Coupling accessory A0714 to one of the two safety cables (A0242 or A0243) provides an anti‑fall kit fixing and adjusting the cable on the load‑bearing element of the building structure.
The cable passes between the two passage holes on the hanging brackets mounted on the 3F LEM.
Suitable for environments subject to impacts or seismic zones.
Clamp in nickel‑plated brass suitable for fixing and adjustment of galvanised steel wire (diameter 1,25 mm ‑ 1,5 mm ‑ 2 mm), complete with locking screws.
The 2 hole clamp allows to block and adjust the cable on a bearing element (part of the building) or on rounded eye bolt.
Code
Item
A0714
Clamp 2 holes susp.- 100 pcs
The pack contains 100 pieces.Reducing sealing ring, dedicated to the use of cables with an external diameter of up to 8 mm.
Code
Item
A0521
Reducing sealing ring diam.8mm
