3F Linux DT UGR
Code A20767
L<3000 cd/m² 65°
ON/OFF electronic wiring 230V‑50/60Hz
Code
Item
W
lm
K
CRI
L x A x H
IP
3F Linux DT 2x15 LED UGR L1778
34
4900
4000
>80
1778x118x95
40
3F Linux DT 2x30 LED UGR L1778
66
9122
4000
>80
1778x118x95
40
DALI electronic wiring 230V‑50/60Hz
Code
Item
W
lm
K
CRI
L x A x H
IP
3F Linux DT 2x15 LED DALI UGR L1778
34
4900
4000
>80
1778x118x95
40
3F Linux DT 2x30 LED DALI UGR L1778
66
9122
4000
>80
1778x118x95
40
ILLUMINOTECHNICAL
Controlled symmetric distribution.
Average luminance <3000 cd/m² for radial angles >65°.
Lifetime (L80/B10): 100000 h. (tq+25°C)
Photobiological safety RG0.
SOURCE
Linear LED modules.
Colour initial tolerance (MacAdam): SDCM 3.
MECHANICAL
Housing in hot‑galvanised steel, painted in white polyester, obtained through rolling process.
Light unit in hot‑galvanised steel, painted in white polyester base with fixing springs and retractable safety hooks in stainless steel.
Diffuser with differentiated geometry, made of transparent methacrylate (PMMA) with microprismatic finish, anti‑glare on the flat part and opal on the side.
Anti‑glare opal methacrylate (PMMA) filter for brightness uniformity.
End caps in white polycarbonate.
ELECTRICAL
In compliance with EN 60598‑1.
Truck adapter, 4/6‑way.
LIGHT MANAGEMENT
The DALI products can be controlled with 3F Easy Dim or 3F Smart Dimming technology.
ON REQUEST
- different power levels, colour rendering indices and colour temperatures
- housing and accessories in different RAL colours
- wiring: CLO
Code
Item
A20450
Slid.invis.brack.w/adj.for susp.3F Linux
Free‑position invisible sliding bracket with regulator in stainless steel.
The suspension cable must be made of galvanised steel with 49 elementary wires of minimum 1.5 mm diameter (for a weight of 15 kg) and 2 mm (for a weight of 25 kg).Code
Item
A20451
Slid.invis.brack.ceiling instal.3F Linux
Free‑position sliding bracket in stainless steel.
Code
Item
A20453
S-shaped chain hook w/slid.bra. 3F Linux
Free‑position sliding bracket in stainless steel.
Supplied with S‑hook for galvanised steel chain.Wall‑mounting bracket, in white painted steel.
Code
Item
A20474
Safety screw locking slid.bra.3F Linux S
Safety screw for locking the sliding bracket, made of hot galvanised steel.
These accessories must ALWAYS be used with one of the following codes: A20450 ‑ A20451 ‑ A20453.Code
Item
A20452
Stainless steel hook for chain
Hook to suspended luminaires to a chain.
Code
Item
A20485
Suspension without adjustment - 0.5 m
A20486
Suspension without adjustment - 1 m
A20487
Suspension without adjustment - 2 m
A20488
Suspension without adjustment - 3 m
A20489
Suspension without adjustment - 4 m
A20490
Suspension without adjustment - 5 m
A20491
Suspension without adjustment - 6 m
Suspension without controller, galvanised steel cable 1.5 mm diameter, load 15 kg.
Code
Item
A02562
Caddy for exposed profiles of 24 mm
Caddy hook to create a point from which to suspend the system or the loads to false ceilings with visible profiles.
To be installed on exposed profiles (width 24 mm) of false ceilings.
We recommend reinforcing the false‑ceiling fixing at the point where the Caddy is to be installed.
Supplied complete with nut and washer.
The suspension must be purchased separately.Code
Item
A0716
Coil galv. cable diam. 1.5mm - 100m
The pack contains 100 metres.A0717
Coil galv. cable diam. 1.5mm - 500m
The pack contains 500 metres.A0718
Coil galv. cable diam. 1.5mm - 1000m
The pack contains 1000 metres.Galvanised steel cable, diameter 1.5 mm, composed of 49 wires.
15 kg capacity (ratio 5:1).
Code
Item
A0714
Clamp 2 holes susp.- 100 pcs
The pack contains 100 pieces.Clamp in nickel‑plated brass suitable for fixing and adjustment of galvanised steel wire (diameter 1,25 mm 1,5 mm ‑ 2 mm), complete with locking screws.
The 2 hole clamp allows to block and adjust the cable on a bearing element (part of the building) or on rounded eye bolt.
Code
Item
A0659
Adjustable clamp 2 holes - 10 pcs
The pack contains 10 pieces.Clamp suitable for fixing and adjustment of galvanised steel wire (diameter 1.5 mm), with quick adjustment through unlock buttons.
The clamp with 2 holes allow to fix and adjust the cable on the carrier structural element (belonging to the building) or with eye screw fixing.
Code
Item
A20433
Linear connecting element
Element to connect in hot‑galvanised steel.
Code
Item
A20434
T-Connecting element 3F Linux
T‑shaped connecting element in hot‑galvanised steel.
Code
Item
A20436
L-Connecting element 3F L Linux
L‑shaped connecting element in hot‑galvanised steel.
Code
Item
A20448
Pair of closing end 3F Linux
Pair of closing end 3F Linux S, made of white polycarbonate.
Code
Item
A20478
Anti-slip term. incli. 3F Linux
Safety bracket in white painted steel to secure lighting elements if installed vertically.
This accessory must always be used in combination with end terminals.Code
Item
A20442
Closing Top HIGH - L1778
High closing top, with a length of 1778 mm that can be cut to 889 mm, made of impact‑resistant white PVC.
IP54 high closing top, with a length of 1778 mm that can be cut to 889 mm, made of impact‑resistant white PVC.
Code
Item
A20428
Closing Top LOW - L1778
Cuttable low closing top, with a length of 1778 mm that can be cut, made of impact‑resistant white PVC.
Accessory compatible ONLY with 3F Linux S-NL | IP40 and without 3F Linux L, 3F Linux D or 3F Linux DR light units.Code
Item
A20475
3F Linux Cable Support (10 pcs)
The pack contains 10 pieces.Electric cable support.
One every 50 cm is recommended.
Made of polycarbonate.
Code
Item
A20470
Pair of mounting brack. lum. 3F Linux S
Brackets for the installation of luminaries on 3F Linux S and S‑NL bars (check the compatibility with our technical departments). Made of hot galvanised steel.
Brackets for installation of 3F Linda luminaries on 3F Linux S structures.
Made from hot‑galvanised steel.
Closing end 3F Linux S IP54, made of white polycarbonate.
IP54 end terminal with a power‑supply line entry hole.
IP54 end terminal with two power‑supply line entry holes.
Code
Item
A20459
5-pole socket-plug L-branch 3F Linux S
A20460
7-pole socket-plug L-branch 3F Linux S
Electric branch with plug‑socket to realise L‑shaped connections.
These accessories must always be used in conjunction with L connecting elements.
Accessories not compatible with 3F Linux S‑NL (cod.: A20011, A20012).Code
Item
A20464
5-pole socket-plug T-branch 3F Linux S
A20465
7-pole socket-plug T-branch 3F Linux S
Electric branch with plug‑socket to realise T‑shaped connections.
These accessories must always be used in conjunction with T connecting elements.
Accessories not compatible with 3F Linux S‑NL (cod.: A20011, A20012).Code
Item
A20454
5-pole socket-plug term.block 3F Linux S
A20455
7-pole socket-plug term.block 3F Linux S
Quick connection non‑reversible plug‑socket terminal block, for connection to the power line at the start or end of the channel.
Accessories not compatible with 3F Linux S‑NL (cod.: A20011, A20012).Code
Item
A20500
Cen.pow-sup.soc-plug ter-blo.3FLinuxS 5P
A20501
Cen.pow-sup.soc-plug ter-blo.3FLinuxS 7P
Quick connection non‑reversible plug‑socket terminal block, for connection to the power line at the centre of the channel.
Accessories not compatible with 3F Linux S‑NL (cod.: A20011, A20012).Code
Item
A0490
Connection to the earth
Connection to the earth, by means of galvanised M5 screw and nut, for Ø 6 mm hole at the end of every structure.
Code
Item
A20479
Power cable for luminaires 3P-3F Linux
A20480
Power cable for luminaires 5P-3F Linux
Power cable for luminaires not part of the 3F Linux system.
Accessories not compatible with 3F Linux S‑NL (cod.: A20011, A20012).Code
Item
A0801
Electric ext. with plug 3F Linux DALI-EP
A0802
Electric extension with plug 3F Linux
Extension cord to connect some light modules interspersed with blind covers with a length of 889 mm (contact our technical department).
Attention: the code A0801 is supplied with a 5‑pole electric line, while the code A0802 is supplied with a 3‑pole electric line.Code
Item
A20476
Contact pin for 3F Linux plug (50 pcs.)
The pack contains 50 pieces.Additional contact for light unit plug.
Accessory not compatible with 3F Linux S‑NL (cod.: A20011, A20012).
