IP20 wireless control unit with DALI interface.
It generates a local DALI‑2 bus, enhabling a direct connection to a DALI interface LED driver.
The module can only be used in a closed system and must not be connected to an existing DALI network.
The module is wireless controlled using a Casambi app for smartphones and tablets using Bluetooth 4.0 technology.
The devices automatically create an adaptive, robust, and reliable wireless mesh network, allowing for the easy and efficient management of a high number of fixtures.
The control unit is preset to the DALI 1CH profile, maning the device can control a single DALI driver with broadcast commands.
In addition to the DALI broadcast, other operating modes are available, such as:

• Button (normally open)
• Control unit 0/1‑10V
• Control unit DALI Tunable White DT8
• Presence sensor

If different from the preset mode, the desired operating profile must be set directly by the user before coupling the control unit to the Casambi network.
For installations in industrial plants, use a plastic IP box (min. dimensions 185x85mm).

IP20 Extender for wireless control of LED driver with dimming DALI (or 1‑10V) interface based on Casambi technology.
It has a DALI‑2 output with the capacity to control up to 40 lighting fixtures.
With the addition of a further external BUS DALI power supply it is possible to control up to 64 fixtures.
IP20 Extender is preset to the DALI broadcast profile, meaning all the luminaires connected to it are dimmable at the same level.
In addition to the DALI broadcast other operating modes are available, such as:

• EXTENDER DALI 8CH
• EXTENDER DALI Tunable White
• EXTENDER 0/1‑10V
• EXTENDER DALI 4CH
• EXTENDER DALI DT8 Tunable White

If different from the preset mode, the desired operating profile must be set directly by the user before coupling the extender to the Casambi network.
For installations in industrial plants, use a plastic IP box (min. dimensions 120x85mm).

Bridge DALI/Casambi: a fixture that allows fixtures equipped with mesh Bluetooth Casambi to interface with a traditional DALI system and to be adjusted by a DALI control unit.
Inside the usual DALI circuit it is possible to have a maximum of 64 cabled DALI and Casambi wireless devices.
It only works with Casambi Evolution networks.
The DALI Bridge is transparent in the DALI system, and therefore does not require an address.
There is no need for a power supply given that it is supplied directly by the DALI bus.

Xpress is a wall mounted wireless user interface; it can be installed wherever the user chooses thanks to battery power with autonomy of 2‑3 years providing direct access to all the most important Casambi system control functions.
As well as switching the fixtures on and off, Xpress controls dimming, colour temperature change in fixtures equipped with this technology, and control of individual fixtures and lighting scenes or sequence management.