Beta Ice LED Wide
Wide distribution.
Galvanised steel screen fixing clips.
Code
Item
Absorbed
power (W)
Output
flux (lm)
CCT
(K)
CRI
Dimensions
L x A x H
IP
ON/OFF electronic wiring 230V-50/60Hz, fuse
53860
A3F Ice LED 902x12W UR95 AMPIO L655
29
3732
4000
>80
655x235x140
65
53861
A3F Ice LED 902x24W UR95 AMPIO L1265
56
7471
4000
>80
1265x235x135
65
53862
A3F Ice LED 902x30W UR95 AMPIO L1565
70
9351
4000
>80
1565x235x135
65
53863
A3F Ice LED 902x60W UR95 AMPIO L1565
140
17435
4000
>80
1565x235x135
65
Beta Ice LED Concentrated
Concentrated elliptical distribution.
Galvanised steel screen fixing clips.
Code
Item
Absorbed
power (W)
Output
flux (lm)
CCT
(K)
CRI
Dimensions
L x A x H
IP
ON/OFF electronic wiring 230V-50/60Hz, fuse
53867
A3F Ice LED 902x30W UR95 CONC L1565
70
9236
4000
>80
1565x235x135
65
53868
A3F Ice LED 902x60W UR95 CONC L1565
140
17746
4000
>80
1565x235x135
65
Construction characteristics
Illuminotechnical characteristicsWide or concentrated direct distribution.
Lifetime (L93/B10): 30000 h. (tq+25°C)
Lifetime (L90/B10): 50000 h. (tq+25°C)
Lifetime (L85/B10): 80000 h. (tq+25°C)
Lifetime (L80/B10): 100000 h. (tq+25°C)
Photobiological safety in compliance with IEC/TR 62778: RG0 risk exempt, (IEC 62471).
Mechanical characteristicsSingle-piece housing in pressed aluminium, powder-coated in white epoxy-polyester.
Oversized flux recuperator in specular aluminium, with titanium-magnesium surface treatment, non-iridescent.
Gear-tray unit in hot-galvanised steel, painted in white polyester, fixed to the housing by means of "Ribloc" rapid devices in galvanised steel, hinged opening.
Mounting brackets and locking screen clips in stainless steel AISI 304.
Electrical characteristicsIn compliance with EN 60598-1.
Entry for power-supply cable at one end cap, through M20x1,5 self-extinguishing nylon cable gland.
L-N-E line terminal block with ceramic isolator protection powder-filled fuse, rapid type, 5x20 mm, of suitable capacity, breaking capacity 1500 A.
Solid single-core silicone rubber insulated wiring cable with fibreglass braid type UG4T2/2 cross section 0.75 mm².
Source characteristics
- Linear LED modules protected up to RH95 relative humidity.
- Colour initial tolerance (MacAdam): SDCM 3.
On request
- different colour rendering indices and colour temperatures
- linear LED modules, with special protection against aggressive chemically-volatile substances, for standard LED technology
- DALI version
Applications
12W versionAmbient temperature from -30°C to +45°C.
24W, 30W versionsAmbient temperature from -35°C to +45°C.
60W versionAmbient temperature from -35°C to +25°C.
Before installation we recommend checking that there are no contraindications to the use of aluminium and polycarbonate inside the refrigeration cell.
For applications in environments in which disturbances on the power network may be present and/or involve use at low temperatures, surge protection devices should be fitted on the power supply and any causes of undervoltages eliminated.
Installation
By means of slotted corner brackets and stainless steel nuts and bolts.
Beta Ice LED luminaires can be installed in environments with humidity rate up to 95%.Pair of mounting brackets and hooks for wall-mounting, with nuts and bolts for luminaire fastening, everything in stainless steel.
Pair of steel hooks for suspended installation, with nuts and bolts for luminaire fastening.
In case of chain suspension installation, ALWAYS use one of the following codes: A0653.
5-pole cascade connection line, stiff cable H07 V2-U, HT 90°C, 1.5 mm², terminal blocks with connection capacity 2x2.5 mm².
Wire-guard for applications in dry environments, against shocks coming from any directions, galvanised steel rod Ø 5 mm.
Only for luminaires fixed without hooks.
Anti-condensation diffuser cable gland.
Code
Item
A0187
Anti-condensation cable gland
Recommended for installations in environments with temperature sudden changes or subject to condensation.
Reducing sealing ring, dedicated to the use of cables with an external diameter of up to 8 mm.
Code
Item
Reducing sealing ring diam.8mm
Snap hooks clips for chain suspension, galvanised steel.
Code
Item
A0653
Pair of fixing carab.for chain instal.