Beta 430 LED Wide
Wide symmetric lighting distribution.
Code
Item
Absorbed
power (W)
Output
flux (lm)
CCT
(K)
CRI
Dimensions
L x A x H
IP
ON/OFF electronic wiring 230V-50/60Hz
53438
i3F LED 764x50W CR AMPIO VT L1251
209
31651
4000
>80
1251x430x159
64
53452
i3F LED 764x50W CR AMPIO SL L1251
209
31651
4000
>80
1251x430x159
64
53445
i3F LED 764x63W CR AMPIO VT L1551
261
39567
4000
>80
1551x430x159
64
53459
i3F LED 764x63W CR AMPIO SL L1551
261
39567
4000
>80
1551x430x159
64
Beta 430 LED Iperconcentrated
Symmetrical elliptical hyperconcentrated distribution.
Recommended minimum installation height: 4 meters from the ground.
Code
Item
Absorbed
power (W)
Output
flux (lm)
CCT
(K)
CRI
Dimensions
L x A x H
IP
ON/OFF electronic wiring 230V-50/60Hz
53490
Beta Iperconc LED 4x30W CR VT IP64 L1551
140
17975
4000
>80
1551x430x159
64
53493
Beta Iperconc LED 4x30W CR SL IP64 L1551
140
17975
4000
>80
1551x430x159
64
Construction characteristics
Illuminotechnical characteristicsWide symmetrical or hyperconcentrated distribution.
Lifetime (L93/B10): 30000 h. (tq+25°C)
Lifetime (L90/B10): 50000 h. (tq+25°C)
Lifetime (L85/B10): 80000 h. (tq+25°C)
Lifetime (L80/B10): 100000 h. (tq+25°C)
Photobiological safety in compliance with IEC/TR 62778: RG0 risk exempt, (IEC 62471).
Mechanical characteristicsHousing in steel, powder-coated in white epoxy-polyester.
Total flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent.
Single-piece perimeter frame in galvanized steel, sealing gasket, hinged opening by means of clips in galvanized steel.
Safety system to prevent diffuser from falling.
Transparent glass HST tempered, non-combustible.
SL transparent PMMA flat diffuser.
Electrical characteristicsIn compliance with EN 60598-1.
Quick connection in polycarbonate with M20x1,5 cable gland, to access the terminal block positioned on a removable runner.
Twin-circuit.
Source characteristics
- Linear LED modules.
- Color initial tolerance (MacAdam): SDCM 3.
- Zhaga Book 7 compliant.
On request
- different colour rendering indices and colour temperatures
- anti-glare moulded VS glass
- laminated glass
- diffuser in prismatic PMMA or polycarbonate, either transparent or prismatic
- wiring: dimmable, CLO, single-circuit
- linear LED modules, with special protection against aggressive chemically-volatile substances, for standard LED technology
Applications
Ambient temperature from -20°C to +35°C.
Environments: commercial, industrial, sports, stores, sports halls, gymnasiums.
Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with extreme temperature changes), use luminaires with laminated glass.
Tempered glass is not immune to falling fragments from harmless and caused by shocks or exceptionally derived from the tempering process.
Installation
Suspension mounted with a chain or a bus bar.
Notes
HST glassHST glass is composed of a tempered glass sheet which has undergone a thermal stabilisation process (Heat Soak Test) which reduces the risk of spontaneous breakage caused by nickel-sulfide inclusions inside the glass.
It is not immune from harmless falling fragments, caused byshocks or, exceptionally, derived from the tempering process.
It is the user's responsibility to identify the most suitable type of diffuser for the application type.
Wire-guard for applications in dry environments, against shocks coming from any directions, in galvanized steel rod Ø 5 mm; only for luminaires fixed with no hooks.
Code
Item
A0528
Wireguard Beta 430 L1251
Reducing sealing ring, dedicated to the use of cables with an external diameter of up to 8 mm.
Code
Item
Reducing sealing ring diam.8mm