L 320 LED Sensor LGS
Low glaring flat diffuser, microprismatic in methacrylate
Code 21598
L<1500 cd/m² 65°
Average luminance <1500 cd/m² for radial angles >65°.
LGS micro-prismatic flat diffuser in transparent methacrylate, multilenticular exterior, anti-glare, locked to the white painted aluminium perimetral frame, sealing gasket, hinged opening.
Anti-glare opal polycarbonate filter for brightness uniformity.
Code
Item
Absorbed
power (W)
Output
flux (lm)
CCT
(K)
CRI
Dimensions
L x A x H
IP
Electronic wiring 230V-50/60Hz
21598
L 323x10W LED Sensor CF LGS 596x596
34
3178
4000
>80
596x596x80
54
L 320 LED Sensor SP
Flat diffuser, prismatic in methacrylate
Code 21282
L<3000 cd/m² 65°
Average luminance <3000 cd/m² for radial angles >65°.
SP transparent PMMA diffuser, prismatic exterior, anti-glare, locked to the prepainted white aluminium perimeter frame with sealing gasket, hinged opening.
Code
Item
Absorbed
power (W)
Output
flux (lm)
CCT
(K)
CRI
Dimensions
L x A x H
IP
Electronic wiring 230V-50/60Hz
21282
L 323x10W LED Sensor CF SP 596x596
34
4163
4000
>80
596x596x80
54
Construction characteristics
Illuminotechnical characteristicsDirect symmetric distribution.
Lifetime (L93/B10): 30000 h. (tq+25°C)
Lifetime (L90/B10): 50000 h. (tq+25°C)
Lifetime (L85/B10): 80000 h. (tq+25°C)
Lifetime (L80/B10): 100000 h. (tq+25°C)
Photobiological safety RG0, risk exempt, in compliance with IEC 62471, IEC/TR 62778.
Mechanical characteristicsHousing in hot-galvanized steel, painted in white polyester.
Attention: before ordering these products, we ask you to check the Installation instructions if the type of installation requires accessory brackets.Electrical characteristicsIn compliance with EN 60598-1.
On board DALI light sensor (no cables to be added).
CF Corridor function: even with the environment free of people, the luminous flux is maintained at 10%.
Source characteristics
- Linear LED modules.
- Color initial tolerance (MacAdam): SDCM 2.
On request
- diffuser in OP opal PMMA or SP polycarbonate, self-extinguishing V2
- different power levels, colour rendering indices and colour temperatures
- wiring: emergency
- luminaires for pull-up installation with brackets
Applications
Environments: staterooms, with VDTs, offices.
Environments where demanding visual tasks are performed and soft diffuse light is required for optimal visual comfort and total shielding of the light source.
Installation
Lay-in or pull-up installation with brackets.
Light Management
For more information on 3F Sensor technology, refer to "Light Management".
Anti-fall safety cable for fixing the housing to the building structure.
Length 2.5 m.
Plug for quick connection of the luminaire, 3-pole irreversible to be snapped (Snap-in), with integrated locking device, H07 V2-U HT90° 1.5 mm² cables, for the connection to the terminal block of the luminaire.
Connection for single-circuit wiring: order white plug.
Connection for twin-circuit, dimmable, emergency wiring: order white plug plus black plug.
Code
Item
A0720
Wieland (white plug)
A0722
Ensto (white plug+ adapter)
A0725
Wieland (black plug)
A0727
Ensto (black plug+ adapter)
This accessory is suitable for square products only.
Adapter frame in white-painted steel, for installing luminaries with dimensions of 596x596 mm on false ceilings with dimensions of 625x625 mm.
Also useful for pull-up installations on plasterboard false ceilings.
Code
Item
A0798
621x621 frame + brackets
Installation instructionsDownload
IMI0337000.pdfThis accessory is suitable for square products only.
Galvanized steel fixing bracket for pull-up installation on plasterboard.
Pack for 1 luminaire.
Code
Item
A0173
15HI - L320-L350-L450
The pack contains 4 pieces.Excursion min. 0 mm, max. 25 mm.
This accessory is suitable for square products only.
Not suitable for diffused light recessed luminaires.
Fixing bracket in galvanized steel.
Pack for 1 luminaire.
Code
Item
A0177
15ZH - L320-L350-L560
The pack contains 4 pieces.For square luminaires with louvre (excursion min. 0 mm, max. 60 mm), with diffuser and glass (excursion min. 15 mm, max. 60 mm).
For rectangular luminaires (excursion min. 45 mm, max. 72 mm), with diffuser and glass (excursion min. 27 mm, max. 65 mm).
Suitable for pull-up installation on plasterboard.
Not suitable for diffused light recessed luminaires.
Fixing bracket in galvanized steel for ceiling pull-up installation.
Pack for 1 luminaire.
Code
Item
A0170
15BS - L320-L400-L560
The pack contains 4 pieces.For rectangular luminaires with louvre (excursion min. 18 mm, max. 45 mm), with diffuser (excursion min. 0 mm, max. 40 mm).
Not suitable for diffused light recessed luminaires.
Fixing bracket in galvanized steel for installation coplanar with metal panels with concealed structure.
Pack for 1 luminaire.
Code
Item
A0179
15LB - L320-350 pann.met.
The pack contains 4 pieces.For square luminaires with louvre, mounting in two positions (23/36 mm, 53/66 mm) with diffuser (36 mm and 66 mm).
Not suitable for diffused light recessed luminaires.
