Yes
No
References
Press Area
my3F
en
Insert login and password to be identified
Remember me
Enter
Products
 | 
 | 
 | 
L 320 LED
Case History
Models
Characteristics
Accessories
L 320 LED 2MG
Code 28844
L<1000 cd/m² 65°
Average luminance <1000 cd/m² for radial angles >65°.
2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with transverse blades closed at the top.
Prismatic PMMA diffuser for total shielding of the louvre compartment.
Film protective against dust and finger marks, adhesive, attached to louvre.
Code
Item
Absorbed power (W)
Output flux (lm)
CCT (K)
CRI
Dimensions
L x A x H
IP
ON/OFF electronic wiring 230V-50/60Hz
28844
L 323x10W LED 2MG 596x596
34
4287
4000
>80
596x596x80
20
22722
L 323x10W/940 LED 2MG 596x596
34
3515
4000
>90
596x596x80
20
28846
L 322x18W LED 2MG 296x1196
40
5179
4000
>80
1196x296x95
20
DALI electronic wiring 230V-50/60Hz
28856
L 323x10W LED DALI 2MG 596x596
34
4287
4000
>80
596x596x80
20
22724
L 323x10W/940 LED DALI 2MG 596x596
34
3515
4000
>90
596x596x80
20
28858
L 322x18W LED DALI 2MG 296x1196
40
5179
4000
>80
1196x296x95
20
EP maintained emergency wiring, 1hr duration with 24hrs recharge
28847
L 323x10W LED EP 2MG 596x596
35
4287
4000
>80
596x596x80
20
22723
L 323x10W/940 LED EP 2MG 596x596
35
3515
4000
>90
596x596x80
20
28849
L 322x18W LED EP 2MG 296x1196
41
5179
4000
>80
1196x296x95
20
L 320 LED 2S
Code 28826
L<1000 cd/m² 65°
Average luminance <1000 cd/m² for radial angles >65°.
2S parabolic louvre in semi-specular aluminium, non-reflecting, with transverse blades closed at the top.
Prismatic PMMA diffuser for total shielding of the louvre compartment.
Film protective against dust and finger marks, adhesive, attached to louvre.
Code
Item
Absorbed power (W)
Output flux (lm)
CCT (K)
CRI
Dimensions
L x A x H
IP
ON/OFF electronic wiring 230V-50/60Hz
28826
L 323x10W LED 2S 596x596
34
3997
4000
>80
596x596x80
20
22716
L 323x10W/940 LED 2S 596x596
34
3277
4000
>90
596x596x80
20
28828
L 322x18W LED 2S 296x1196
40
4730
4000
>80
1196x296x95
20
DALI electronic wiring 230V-50/60Hz
28838
L 323x10W LED DALI 2S 596x596
34
3997
4000
>80
596x596x80
20
22718
L 323x10W/940 LED DALI 2S 596x596
34
3277
4000
>90
596x596x80
20
28840
L 322x18W LED DALI 2S 296x1196
40
4730
4000
>80
1196x296x95
20
EP maintained emergency wiring, 1hr duration with 24hrs recharge
28829
L 323x10W LED EP 2S 596x596
35
3997
4000
>80
596x596x80
20
22717
L 323x10W/940 LED EP 2S 596x596
35
3277
4000
>90
596x596x80
20
28831
L 322x18W LED EP 2S 296x1196
41
4730
4000
>80
1196x296x95
20
L 320 LED SP
Code 21244
L<3000 cd/m² 65°
Average luminance <3000 cd/m² for radial angles >65°.
SP transparent PMMA diffuser, prismatic exterior, anti-glare, locked to the prepainted white aluminium perimeter frame with sealing gasket, hinged opening.
Code
Item
Absorbed power (W)
Output flux (lm)
CCT (K)
CRI
Dimensions
L x A x H
IP
ON/OFF electronic wiring 230V-50/60Hz
21244
L 323x10W LED SP 596x596
34
4163
4000
>80
596x596x80
54
22701
L 323x10W/940 LED SP 596x596
34
3413
4000
>90
596x596x80
54
21287
L 322x18W LED SP 296x1196
40
5272
4000
>80
1196x296x95
54
21245
L 324x10W LED SP 596x596
45
5516
4000
>80
596x596x80
54
22702
L 324x10W/940 LED SP 596x596
45
4523
4000
>90
596x596x80
54
DALI electronic wiring 230V-50/60Hz
21256
L 323x10W LED DALI SP 596x596
34
4163
4000
>80
596x596x80
54
22703
L 323x10W/940 LED DALI SP 596x596
34
3413
4000
>90
596x596x80
54
21290
L 322x18W LED DALI SP 296x1196
40
5272
4000
>80
1196x296x95
54
21257
L 324x10W LED DALI SP 596x596
45
5516
4000
>80
596x596x80
54
22704
L 324x10W/940 LED DALI SP 596x596
45
4523
4000
>90
596x596x80
54
EP maintained emergency wiring, 1hr duration with 24hrs recharge
21262
L 323x10W LED EP SP 596x596
35
4163
4000
>80
596x596x80
54
22705
L 323x10W/940 LED EP SP 596x596
35
3413
4000
>90
596x596x80
54
21293
L 322x18W LED EP SP 296x1196
41
5272
4000
>80
1196x296x95
54
21263
L 324x10W LED EP SP 596x596
46
5516
4000
>80
596x596x80
54
22706
L 324x10W/940 LED EP SP 596x596
46
4523
4000
>90
596x596x80
54
L 320 LED LGS
Code 21580
L<1500 cd/m² 65°
2x - 4x - Average luminance <3000 cd/m² for radial angles >65°.
3x - Average luminance <1500 cd/m² for radial angles >65°.
LGS micro-prismatic flat diffuser in transparent methacrylate, multilenticular exterior, anti-glare, locked to the white painted aluminium perimetral frame, sealing gasket, hinged opening.
Anti-glare opal polycarbonate filter for brightness uniformity.
Code
Item
Absorbed power (W)
Output flux (lm)
CCT (K)
CRI
Dimensions
L x A x H
IP
ON/OFF electronic wiring 230V-50/60Hz
21580
L 323x10W LED LGS 596x596
34
3178
4000
>80
596x596x80
54
21600
L 322x18W LED LGS 296x1196
40
4102
4000
>80
1196x296x95
54
21581
L 324x10W LED LGS 596x596
45
4292
4000
>80
596x596x80
54
22709
L 324x10W/940 LED LGS 596x596
45
3520
4000
>90
596x596x80
54
DALI electronic wiring 230V-50/60Hz
21586
L 323x10W LED DALI LGS 596x596
34
3178
4000
>80
596x596x80
54
21603
L 322x18W LED DALI LGS 296x1196
40
4102
4000
>80
1196x296x95
54
21587
L 324x10W LED DALI LGS 596x596
45
4292
4000
>80
596x596x80
54
22710
L 324x10W/940 LED DALI LGS 596x596
45
3520
4000
>90
596x596x80
54
EP maintained emergency wiring, 1hr duration with 24hrs recharge
21589
L 323x10W LED EP LGS 596x596
35
3178
4000
>80
596x596x80
54
21606
L 322x18W LED EP LGS 296x1196
41
4102
4000
>80
1196x296x95
54
21590
L 324x10W LED EP LGS 596x596
46
4292
4000
>80
596x596x80
54
22711
L 324x10W/940 LED EP LGS 596x596
46
3520
4000
>90
596x596x80
54
Construction characteristics
Illuminotechnical characteristics
Direct symmetric distribution.
Lifetime (L93/B10): 30000 h. (tq+25°C)
Lifetime (L90/B10): 50000 h. (tq+25°C)
Lifetime (L85/B10): 80000 h. (tq+25°C)
Lifetime (L80/B10): 100000 h. (tq+25°C)
Photobiological safety in compliance with IEC/TR 62778: RG0 risk exempt, (IEC 62471).
Mechanical characteristics
Housing in hot-galvanised steel, painted in white polyester.
Attention: before ordering these products, we ask you to check the Installation instructions if the type of installation requires accessory brackets.
Electrical characteristics
In compliance with EN 60598-1.
Luminaires with EP permanent emergency wiring are EN 60598-2-22 standard compliant.
Source characteristics
  • Linear LED modules.
10W version
  • Colour initial tolerance (MacAdam): SDCM 2.
18W version
  • Colour initial tolerance (MacAdam): SDCM 3.
On request
  • different power levels, colour rendering indices and colour temperatures
  • wiring: CLO
  • Sensor version
  • diffuser in OP opal PMMA or SP polycarbonate, self-extinguishing V2
  • luminaires for pull-up installation with brackets
Applications
Environments: staterooms, with VDTs, offices.
Environments where demanding visual tasks are performed and soft diffuse light is required for optimal visual comfort and total shielding of the light source.
SP version
Luminaires suitable, from a hygienic point of view, for use in production plants in the food industry (HACCP / IFS / BRC-Standard).
Installation
Lay-in or pull-up installation with brackets.
Light Management
The DALI products of this family can be controlled manually with the technology 3F Easy Dim or even automatically and manually using the 3F Smart Dimming technology (refer to "Light Management").
Anti-fall safety cable for fixing the housing to the building structure.
Length 2.5 m.
Code
Item
Plug for quick connection of the luminaire, 3-pole irreversible to be snapped (Snap-in), with integrated locking device, H07 V2-U HT90° 1.5 mm² cables, for the connection to the terminal block of the luminaire.
Connection for single-circuit wiring: order white plug.
Connection for twin-circuit, dimmable, emergency wiring: order white plug plus black plug.
Code
Item
A0720
Wieland (white plug)
A0721
Wago (white plug)
A0722
Ensto white plug + adapter
A0725
Wieland (black plug)
A0726
Wago (black plug)
A0727
Ensto black plug + adapter
This accessory is suitable for square products only.
Adapter frame in white-painted steel, for installing luminaries with dimensions of 596x596 mm on false ceilings with dimensions of 625x625 mm.
Also useful for pull-up installations on plasterboard false ceilings.
Code
Item
A0798
621x621 frame + brackets
Installation instructions download
This accessory is suitable for square products only.
Galvanised steel fixing bracket for pull-up installation on plasterboard.
Pack for 1 luminaire.
Code
Item
A0173
15HI Brackets - L320-L350-L450
The pack contains 4 pieces.
Excursion min. 0 mm, max. 25 mm.
This accessory is suitable for square products only.
Fixing bracket in galvanised steel.
Pack for 1 luminaire.
Code
Item
A0177
15ZH Brackets - L320-L350-L560
The pack contains 4 pieces.
For square luminaires with louvre (excursion min. 0 mm, max. 60 mm), with diffuser and glass (excursion min. 15 mm, max. 60 mm).
For rectangular luminaires (excursion min. 45 mm, max. 72 mm), with diffuser and glass (excursion min. 27 mm, max. 65 mm).
Suitable for pull-up installation on plasterboard.
Fixing bracket in galvanised steel for ceiling pull-up installation.
Pack for 1 luminaire.
Code
Item
A0170
15BS Brackets - L320-L400-L560
The pack contains 4 pieces.
For rectangular luminaires with louvre (excursion min. 18 mm, max. 45 mm), with diffuser (excursion min. 0 mm, max. 40 mm).
Not suitable for diffused light recessed luminaires.
Fixing bracket in galvanised steel for installation coplanar with metal panels with concealed structure.
Pack for 1 luminaire.
Code
Item
A0179
15LB Brackets - L320-350 met.pan.
The pack contains 4 pieces.
For square luminaires with louvre, mounting in two positions (23/36 mm, 53/66 mm) with diffuser (36 mm and 66 mm).
Not suitable for diffused light recessed luminaires.
Instruments
lightUpdate
The information, at the speed of Light.
Subscribe to lightUpdate to keep in touch with 3F Filippi: news, events and product news delivered to your mailbox.
Head office and factory
Via del Savena 28, Z.I. Piastrella
40065 Pian di Macina, Pianoro (Bologna), Italy
Tax Code. 01033260371 - VAT no. IT00529461204
Share Capital € 3,000,000 fully paid up
Bologna Register of Companies no. 01033260371
REA (economic administrative index) No. 234613

e-Mail: 3f-filippi@3f-filippi.it
Telephone: +39.051.6529611
Fax: +39.051.775884
Group
Social
lightUpdate
The information, at the speed of Light.
Subscribe to lightUpdate to keep in touch with 3F Filippi: news, events and product news delivered to your mailbox.
Cookie information
ACCEPT
This site uses only technical cookies, including third-party cookies, and does not use any profiling cookies.
In order to access the site, it is necessary to consent to the use of cookies by clicking on the "Accept" button.
For more information on how we use cookies and how to remove them, see our cookie policy.