Press Area
en
Insert login and password to be identified
Remember me
Enter
Applications
 | 
 | 
3F Zeta
 | 
3F Zeta L
Models
Characteristics
Accessories
3F Zeta L
Code 10892
Lenses for wide distribution, in transparent PMMA with external flat surface.
Code
Item
Absorbed
power (W)
Output
flux (lm)
CCT
(K)
CRI
Dimensions
L x A x H
IP
Electronic wiring 230V-50/60Hz
10894
3F Zeta L 15 LED L605
17
2749
4000
>80
605x62x67
40
10893
3F Zeta L 30 LED L1194
34
5498
4000
>80
1194x62x67
40
10892
3F Zeta L 40 LED L1489
42
6872
4000
>80
1489x62x67
40
DALI PUSH DIM electronic wiring 230V-50/60Hz
10977
3F Zeta L 30 LED DALI L1194
34
5498
4000
>80
1194x62x67
40
10976
3F Zeta L 40 LED DALI L1489
42
6872
4000
>80
1489x62x67
40
EP maintained emergency wiring, 1hr duration with 24hrs recharge, fuse
10988
3F Zeta L 40 LED EP L1489
43
6872
4000
>80
1489x62x67
40
3F Zeta L AS
Code 10605
Transparent methacrylate asymmetric distribution lenses with a flat external surface.
Code
Item
Absorbed
power (W)
Output
flux (lm)
CCT
(K)
CRI
Dimensions
L x A x H
IP
Electronic wiring 230V-50/60Hz
10605
3F Zeta L AS 40 LED L1489
42
6894
4000
>80
1489x62x67
40
DALI PUSH DIM electronic wiring 230V-50/60Hz
10606
3F Zeta L AS 40 LED DALI L1489
42
6894
4000
>80
1489x62x67
40
EP maintained emergency wiring, 1hr duration with 24hrs recharge, fuse
10607
3F Zeta L AS 40 LED EP L1489
43
6894
4000
>80
1489x62x67
40
3F Zeta L UGR
Code 10864
L<3000 cd/m² 65°
Transparent methacrylate controlled distribution lenses with flat external surface.
Average luminance <3000 cd/m² for radial angles >65°.
Code
Item
Absorbed
power (W)
Output
flux (lm)
CCT
(K)
CRI
Dimensions
L x A x H
IP
Electronic wiring 230V-50/60Hz
10864
NEW
3F Zeta L UGR 30 LED L1194
34
5487
4000
>80
1194x62x67
40
DALI PUSH DIM electronic wiring 230V-50/60Hz
10867
NEW
3F Zeta L UGR 30 LED DALI L1194
34
5487
4000
>80
1194x62x67
40
Construction characteristics
Illuminotechnical characteristics
Wide, direct and asymmetric distribution.
Lifetime (L92/B10): 30000 h. (tq+25°C)
Lifetime (L85/B10): 50000 h. (tq+25°C)
Lifetime (L80/B10): 80000 h. (tq+25°C)
Lifetime (L75/B10): 100000 h. (tq+25°C)
Photobiological safety RG0, risk exempt, in compliance with IEC 62471, IEC/TR 62778.
L UGR version
Average luminance <3000 cd/m² for radial angles >65°.
Mechanical characteristics
Housing in hot-galvanized steel, painted in white polyester, obtained through rolling process.
Light unit in hot-galvanized steel, painted in white polyester base with fixing springs and retractable safety hooks in stainless steel.
End caps in white polycarbonate.
Stainless steel mounting brackets with anti-slip screws.
Electrical characteristics
Luminaires with EP permanent emergency wiring are EN 60598-2-22 standard compliant.
Source characteristics
  • LED modules.
  • Color initial tolerance (MacAdam): SDCM 3.
On request
  • different power levels, colour rendering indices and colour temperatures
  • housing and accessories in different RAL colours
  • class II
  • HACCP versions for use in the food industry
Applications
Environments: architectural, commercial, transit areas, cornices, boards.
L UGR version
Environments: exhibition areas, staterooms, with VDTs, halls, shops, great halls, offices.
Installation
Ceiling, suspension or wall installation.
Light Management
The DALI products of this family can be controlled manually with the technology 3F Easy or even automatically and manually using the 3F Smart Dimming technology (refer to "Light Management").

Suspension with regulator, galvanized steel cable 1.5 mm diameter, load 15 kg.
Code
Item
A0660
Suspension with adjustment for 3F Zeta - 1m
A0661
Suspension with adjustment for 3F Zeta - 2 m
A0662
Suspension with adjustment for 3F Zeta - 3 m
A0663
Suspension with adjustment for 3F Zeta - 4 m
A0664
Suspension with adjustment for 3F Zeta - 5 m
A0665
Suspension with adjustment for 3F Zeta - 6 m
These accessories must always be used in conjunction with the supplied sliding brackets.
Caddy hook to create a point from which to suspend the system or the loads to false ceilings with visible profiles.
Code
Item
A02562
Caddy for exposed profiles of 24 mm
To be installed on exposed profiles (width 24 mm) of false ceilings.
We recommend reinforcing the false-ceiling fixing at the point where the Caddy is to be installed.
Supplied complete with nut and washer.
The suspension must be purchased separately.
Hook to suspended luminaires to a chain.
Code
Item
A20452
Stainless steel hook for chain
Element to connect in between them 3F Linux S bars.
Code
Item
A20433
Linear connecting element for 3F Linux
Galvanized steel cable, diameter 1.5 mm, composed of 49 wires.
15 kg capacity (ratio 5:1).
Code
Item
A0716
Coil galvanized cable diam. 1.5mm - 100m
The pack contains 100 metres.
A0717
Coil galvanized cable diam. 1.5mm - 500m
The pack contains 500 metres.
A0718
Coil galvanized cable diam. 1.5mm - 1000m
The pack contains 1000 metres.
Clamp in nickel-plated brass suitable for fixing and adjustment of galvanized steel wire (diameter 1,25 mm - 1,5 mm - 2 mm), complete with locking screws.
The 2 hole clamp allows to block and adjust the cable on a bearing element (part of the building) or on rounded eye bolt.
Code
Item
A0714
Clamp 2 holes - 100 pcs
The pack contains 100 pieces.
Clamp suitable for fixing and adjustment of galvanized steel wire (diameter 1.5 mm), with quick adjustment through unlock buttons.
The clamp with 2 holes allow to fix and adjust the cable on the carrier structural element (belonging to the building) or with eye screw fixing.
Code
Item
A0659
Adjustable clamp 2 holes - 10 pcs
The pack contains 10 pieces.
Safety bracket in white painted steel to secure lighting elements if installed vertically.
Code
Item
A20478
Anti-slip terminal for inclined 3F Linux installation
This accessory must always be used in combination with end terminals.
New
Electric supply with white polycarbonate case, internal bracket in galvanized steel.
Code
Item
A0679
NEW
5-pole rectangular rose (no cable)
Instruments
lightUpdate
The information, at the speed of Light.
Subscribe to lightUpdate to keep in touch with 3F Filippi: news, events and product news delivered to your mailbox.
Head office and factory
Via del Savena 28, Z.I. Piastrella
40065 Pian di Macina, Pianoro (Bologna), Italy
Tax Code. 01033260371 - VAT no. IT00529461204
Share Capital € 3,000,000 fully paid up
Bologna Register of Companies no. 01033260371
REA (economic administrative index) No. 234613

e-Mail: 3f-filippi@3f-filippi.it
Telephone: +39.051.6529611
Fax: +39.051.775884
Group
Social
lightUpdate
The information, at the speed of Light.
Subscribe to lightUpdate to keep in touch with 3F Filippi: news, events and product news delivered to your mailbox.
Cookie information
ACCEPT
This site uses only technical cookies, including third-party cookies, and does not use any profiling cookies.
In order to access the site, it is necessary to consent to the use of cookies by clicking on the "Accept" button.
For more information on how we use cookies and how to remove them, see our cookie policy.