3F Linda Inox Electronic
EEI A2 electronic wiring, 230V‑50/60Hz, lamp warm start.
Snug fit snap‑lock clips in stainless steel.
Fixing brackets in stainless steel.
EEI A2 electronic wiring ‑ Lamps not included
Code
Item
W
lm
K
CRI
L x A x H
IP
5220
3F Linda Inox 1x18 HF
19
1350
4000
>80
660x100x100
66
5223
3F Linda Inox 2x18 HF
35
2700
4000
>80
660x160x100
66
5221
3F Linda Inox 1x36 HF
36
3350
4000
>80
1270x100x100
66
5222
3F Linda Inox 1x58 HF
55
5200
4000
>80
1570x100x100
66
5224
3F Linda Inox 2x36 HF
71
6700
4000
>80
1270x160x100
66
5225
3F Linda Inox 2x58 HF
109
10400
4000
>80
1570x160x100
66
3F Linda Fluo Emergency EP
Wiring with emergency lighting system (Industrial version, high flux, 15%), 1h duration, 24h recharge.
In compliance with EN 60598‑2‑22.
EP version with maintained operation.
Versions Industria and CONC are provided with concentrated flux recuperator.
Fixing brackets in stainless steel.
Emergency luminous flux.
Pictograms for warning signs available.
Snug fit snap‑lock clips in stainless steel ‑ EEI A2 electronic wiring, EP emergency, fuse ‑ Lamps not included
Code
Item
W
lm
K
CRI
L x A x H
IP
5265
3F Linda Inox 1x18 HF EP
19
1350
4000
>80
660x160x100
66
5254
3F Linda Inox 2x18 HF EP
35
2700
4000
>80
660x160x100
66
5252
3F Linda Inox 1x36 HF EP
36
3350
4000
>80
1270x100x100
66
5253
3F Linda Inox 1x58 HF EP
55
5200
4000
>80
1570x100x100
66
5255
3F Linda Inox 2x36 HF EP
71
6700
4000
>80
1270x160x100
66
5256
3F Linda Inox 2x58 HF EP
109
10400
4000
>80
1570x160x100
66
ILLUMINOTECHNICAL
Diffused symmetric distribution.
Using the flux recuperators (see accessories), it is possible to obtain wide to concentrated and asymmetric lighting distribution to meet any installation requirement.
SOURCE
11W compact fluorescent lamps or T5 lamps, mounted (3F Linda T5 MultiWatt series excluded).
MECHANICAL
Self‑extinguishing V2 polycarbonate housing, injection moulded, RAL 7035 grey.
Ecologic anti‑aging injected sealing gasket.
Diffuser in self‑extinguishing V2 polycarbonate, photo‑engraved interior, UV stabilised, injection moulded with smooth outer surface.
Gear‑holder reflector in hot‑dip galvanised steel, painted with white polyester base.
Snug fit safety snap‑lock clips for diffuser mounting in stainless steel, screwdriver opening.
Stainless steel fixing brackets, 11W versions excluded.
APPLICATIONS
Dry, dusty indoor environments, subject to occasional water splashes.
Virtually in all environments compatibly with the use of any chemicals which could compromise the use of plastic materials.
Not suitable in environments where chlorine fumes, ligroin, hydrocarbon mixtures, mineral oil vapours or fumes of lubricating emulsions to cool down machine tools are present.
Not suitable for installation on surfaces subject to important vibrations, exposed to weather conditions, on ropes or poles.
For specific applications please contact our technical offices.
Suitable for illumination of public car parks and parking grounds referred to DIN 67528:2018‑04.
WARNING
Fixture not suitable for cold stores with an ambient temperature <0°C and/or relative humidity >85%.
ON REQUEST
- wiring: dimmable, twin‑circuit, class II, emergency wiring for T5, emergency inhibition
- luminaires with electronic wiring, in compliance with 94/9/CE (ATEX) standard, group II, category 3D, for Zone 22
- single‑lamp luminaire 160 mm wide
Code
Item
A0660
Suspension with adjustment - 1m
A0661
Suspension with adjustment - 2 m
A0662
Suspension with adjustment - 3 m
A0663
Suspension with adjustment - 4 m
A0664
Suspension with adjustment - 5 m
A0665
Suspension with adjustment - 6 m
Suspension with regulator, galvanised steel cable 1.5 mm diameter, load 15 kg.
Attention: each product requires two suspensions with regulator.Code
Item
A0449
15 GZI w/brack.+ hooks Linda L300
A0450
15 RIT w/bra.+hooks Linda L660-1270-1570
Pair of brackets and hooks in stainless steel, with nuts and bolts for fixing to 3F Linda, for ceiling or wall‑mounting, single and twin‑lamp luminaires.
Minimum tilt angle = 45°.
Code
Item
A0451
15 MBI w/brack.+ hooks Linda L300
A0452
15 FBR w/bra.+hooks Linda L660-1270-1570
Pair of brackets and hooks in stainless steel, with nuts and bolts for fixing to 3F Linda, for wall‑mounting, single and twin‑lamp luminaires.
Code
Item
A0462
13 GSI (pair of susp. hooks Linda L300)
A0463
13 TRM pair of susp.hooks Linda
Pair of stainless steel hooks for suspended installation, with cable clip and nuts and bolts for installation to 3F Linda.
Wire‑guard for applications in dry environments, against shocks coming from any directions, galvanised steel rod Ø 5 mm.
Only for luminaires fixed without hooks.Code
Item
A0447
3F Linda through-line L1570
5‑pole cascade connection line, stiff cable H07 V2‑U, HT 90°C, 1.5 mm², terminal blocks with connection capacity 2x2.5 mm².
Accessory not compatible with ST versions of 3F Linda LED Basic.Anti‑condensation diffuser cable gland.
Recommended for installations in environments with temperature sudden changes or subject to condensation.Code
Item
A0521
Reducing sealing ring diam.8mm
Reducing sealing ring, dedicated to the use of cables with an external diameter of up to 8 mm.
Code
Item
A0464
26 CSG (pictogram P1 Linda L300)
A0465
26 MTH (pictogram P1 Linda L660)
Pictograms for warning signs to be applied on emergency luminaire's diffusers 160 mm wide.
Pictogram, 135 mm high, 240 mm long for L300 luminaires, 605 mm long for L660 luminaires.
Pictograms complying with European standards concerning health and safety signals on the workplace.
Code
Item
A0466
26 DVI (pictogram P2 Linda L300)
A0467
26 MVL (pictogram P2 Linda L660)
Pictograms for warning signs to be applied on emergency luminaire's diffusers 160 mm wide.
Pictogram, 135 mm high, 240 mm long for L300 luminaires, 605 mm long for L660 luminaires.
Pictograms complying with European standards concerning health and safety signals on the workplace.
Code
Item
A0468
26 GZM (pictogram P3 Linda L300)
A0469
26 PXN (pictogram P3 Linda L660)
Pictograms for warning signs to be applied on emergency luminaire's diffusers 160 mm wide.
Pictogram, 135 mm high, 240 mm long for L300 luminaires, 605 mm long for L660 luminaires.
Pictograms complying with European standards concerning health and safety signals on the workplace.
Code
Item
A0434
Safety screw locking Linda - 20 pcs
The pack contains 20 pieces.A0435
Safety screw locking Linda - 100 pcs
The pack contains 100 pieces.Safety screw for 3F Linda locking bracket
