3F Travetta LED 2MG
Code 11481
L<1000 cd/m² 65°
Average luminance <1000 cd/m² for radial angles >65°.
2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium‑magnesium treatment, non‑iridescent, with transverse blades closed at the top.
Prismatic PMMA diffuser for total shielding of the louvre compartment.
Film protective against dust and finger marks, adhesive, attached to louvre.
Code
Item
Absorbed
power (W)
Output
flux (lm)
CCT
(K)
CRI
Dimensions
L x A x H
IP
DALI electronic wiring 230V‑50/60Hz
11481
3F Travetta LED 1x22W DALI 2MG L1590
24.5
3168
4000
>80
1590x190x60
20
11484
3F Travetta LED 2x22W DALI 2MG L1590
49
6236
4000
>80
1590x190x60
20
3F Travetta LED 1x30W/940 DALI 2MG L1590
35
3264
4000
>90
1590x190x60
20
3F Travetta LED 2x22W/940 DALI 2MG L1590
49
5114
4000
>90
1590x190x60
20
3F Travetta LED LGS
Code 11533
L<3000 cd/m² 65°
Average luminance <3000 cd/m² for radial angles >65°.
Flow recuperator in semi‑specular aluminium, high efficiency.
LGS micro‑prismatic flat diffuser in transparent methacrylate, multi‑lenticular exterior, anti‑glare.
Anti‑glare opal polycarbonate filter for brightness uniformity.
Code
Item
Absorbed
power (W)
Output
flux (lm)
CCT
(K)
CRI
Dimensions
L x A x H
IP
ON/OFF electronic wiring 230V‑50/60Hz
11528
3F Travetta LED 1x24W LGS L1290
28
3022
4000
>80
1290x190x60
20
11530
3F Travetta LED 1x30W LGS L1590
34
3783
4000
>80
1590x190x60
20
11531
3F Travetta LED 2x18W LGS L1290
40
4690
4000
>80
1290x190x60
20
11533
3F Travetta LED 2x22W LGS L1590
49
5865
4000
>80
1590x190x60
20
3F Travetta LED 1x24W/940 LGS L1290
28
2478
4000
>90
1290x190x60
20
3F Travetta LED 1x30W/940 LGS L1590
35
3102
4000
>90
1590x190x60
20
3F Travetta LED 2x18W/940 LGS L1290
40
3846
4000
>90
1290x190x60
20
3F Travetta LED 2x22W/940 LGS L1590
49
4809
4000
>90
1590x190x60
20
DALI electronic wiring 230V‑50/60Hz
11537
3F Travetta LED 1x24W DALI LGS L1290
28
3022
4000
>80
1290x190x60
20
11539
3F Travetta LED 1x30W DALI LGS L1590
35
3783
4000
>80
1590x190x60
20
11540
3F Travetta LED 2x18W DALI LGS L1290
40
4690
4000
>80
1290x190x60
20
11542
3F Travetta LED 2x22W DALI LGS L1590
49
5865
4000
>80
1590x190x60
20
3F Travetta LED 1x24W/940 DALI LGS L1290
28
2478
4000
>90
1290x190x60
20
3F Travetta LED 1x30W/940 DALI LGS L1590
35
3102
4000
>90
1590x190x60
20
3F Travetta LED 2x18W/940 DALI LGS L1290
40
3846
4000
>90
1290x190x60
20
3F Travetta LED 2x22W/940 DALI LGS L1590
49
4809
4000
>90
1590x190x60
20
3F Travetta LED OP
OP opal methacrylate flat diffuser, anti‑glare.
Flow recuperator in semi‑specular aluminium, high efficiency.
Code
Item
Absorbed
power (W)
Output
flux (lm)
CCT
(K)
CRI
Dimensions
L x A x H
IP
ON/OFF electronic wiring 230V‑50/60Hz
10731
3F Travetta LED 1x18W OP L1290
20
2335
4000
>80
1290x190x60
20
10732
3F Travetta LED 1x22W OP L1590
24.5
2920
4000
>80
1590x190x60
20
10734
3F Travetta LED 2x18W OP L1290
40
4545
4000
>80
1290x190x60
20
10775
3F Travetta LED 1x40W OP L2200
45
4887
4000
>80
2200x190x60
20
10735
3F Travetta LED 2x22W OP L1590
49
5683
4000
>80
1590x190x60
20
10777
3F Travetta LED 2x40W OP L2200
90
9511
4000
>80
2200x190x60
20
DALI electronic wiring 230V‑50/60Hz
11494
3F Travetta LED 1x18W DALI OP L1290
20
2335
4000
>80
1290x190x60
20
11495
3F Travetta LED 1x22W DALI OP L1590
24.5
2920
4000
>80
1590x190x60
20
11497
3F Travetta LED 2x18W DALI OP L1290
40
4545
4000
>80
1290x190x60
20
11511
3F Travetta LED 1x40W DALI OP L2200
45
4887
4000
>80
2200x190x60
20
11498
3F Travetta LED 2x22W DALI OP L1590
49
5683
4000
>80
1590x190x60
20
11513
3F Travetta LED 2x40W DALI OP L2200
90
9511
4000
>80
2200x190x60
20
Construction characteristics
Illuminotechnical characteristicsDirect symmetric distribution.
Lifetime (L93/B10): 30000 h. (tq+25°C)
Lifetime (L90/B10): 50000 h. (tq+25°C)
Lifetime (L85/B10): 80000 h. (tq+25°C)
Lifetime (L80/B10): 100000 h. (tq+25°C)
Photobiological safety in compliance with IEC/TR 62778: RG0 risk exempt, (IEC 62471).
Mechanical characteristicsHousing with squared shape in white painted steel, with nonreflecting surface.
Electrical characteristicsIn compliance with EN 60598‑1.
Compliance with the EN 60598‑2‑22 standard for power supply from a centralised CPSS emergency system must be verified in the technical data sheets of each individual device on our website.
Terminal block for cascade line connection with connection capacity 2x2.5 mm².
Source characteristics
- Linear LED modules.
- Colour initial tolerance (MacAdam): SDCM 2.
On request
- different power levels, colour rendering indices and colour temperatures
- different dimensions
- housing and accessories in different RAL colours
- wiring: CLO
- emergency versions
Applications
Environments: exhibition areas, staterooms, with VDTs, halls, shops, great halls, offices.
Environments where soft diffuse light is required for optimal visual comfort.
Installation
Ceiling mounted or suspension installation.
Thanks to the full compatibility of dimensions, fixing spacing and accessories with the previous fluorescent version, this product becomes the perfect solution for updating existing installations.
Light Management
The DALI products of this family can be controlled manually with the technology 3F Easy Dim or even automatically and manually using the 3F Smart Dimming technology (refer to "Light Management").
Wall‑mounting bracket, in white painted steel.
Connecting bracket to form linear channels or branches of single luminaires, in galvanised steel with upper holes for adjustable suspensions.
Linear connecting element and for branch, between luminaires or between luminaires and wall, to form channels, in steel with accessorizable cover, white colour.
It allows the passage of the power‑supply line.
Concerning the use of connecting elements in false ceilings 600x600, see installation.
On request: elements of desired length.
Connecting elements for false ceiling 625x625.
Branching in correspondence with the steel linear connecting elements with a white colour accessory cover.
It allows the passage of the power‑supply line.
The 190x190 linear connecting element can also be used for T junctions (request a bracket code A0875) and X junctions (request two brackets code A0875).
To obtain an excellent T or X junction for connecting elements of a false ceiling with 600x600 visible profiles, the combination of a 1110 mm linear element with a 460 mm junction and the combination of a 810 mm linear element with a 310 mm junction are recommended.
Connecting element between luminaires or between luminaire and wall, white colour, composed of aluminium tube 1.5 m long Ø20 mm, which can be sectioned to any desired length, it allows the passage of the power‑supply line.
Linear connecting element end cap to be used when there are connecting elements at the beginning or end of a channel.
Adjustable suspension with polycarbonate case in white colour, internal bracket in galvanised steel.
Wired version with transparent power‑supply cable 5x1.5 mm².
Stainless steel cables Ø 1.25 mm, length 1 m, leaded at one end with adjusters for coupling on the luminaire.
On request: for suspensions longer than 1 m, it is necessary order stainless steel cables Ø 1,25 mm in spool of 100 m and pack of n° 100 clamps.
Accessory always required for 2200 mm long products.
Fixed suspension with white polycarbonate case, internal bracket in galvanised steel.
Wired version with transparent power‑supply cable 5x1.5 mm².
Ø 1.25 mm stainless steel cables leaded at the end for coupling on the luminaire.
Coil of stainless steel cable Ø 1.25 mm, length 100 m.
Clamps in nickel‑plated brass suitable for fixing of steel wire (diameter 1.25 mm ‑ 1.5 mm ‑ 2 mm), complete with locking screws.
Electric supply with white polycarbonate case, internal bracket in galvanised steel.
Code
Item
A0679
5 pole rectangular rose (no cable) WH
