References
Press Area
en
Insert login and password to be identified
Remember me
Enter
Applications
 | 
 | 
3F Linda
 | 
3F Linda LED Ice
Models
Characteristics
Accessories
3F Linda LED Ice 1x
Code 58461
Controlled wide distribution.
Code
Item
Absorbed
power (W)
Output
flux (lm)
CCT
(K)
CRI
Dimensions
L x A x H
IP
Electronic wiring 230V-50/60Hz, fuse
58457
3F Linda LED Ice 1x24W UR95 L1270
28
3914
4000
>80
1270x100x100
65
58461
3F Linda LED Ice 1x30W UR95 L1570
35
4899
4000
>80
1570x100x100
65
3F Linda LED Ice 2x
Code 58463
Controlled wide distribution.
Code
Item
Absorbed
power (W)
Output
flux (lm)
CCT
(K)
CRI
Dimensions
L x A x H
IP
58459
3F Linda LED Ice 2x24W UR95 L1270
56
7617
4000
>80
1270x160x100
65
58463
3F Linda LED Ice 2x30W UR95 L1570
70
9533
4000
>80
1570x160x100
65
Construction characteristics
Illuminotechnical characteristics
Controlled symmetric distribution.
Lifetime (L92/B10): 30000 h. (tq+25°C)
Lifetime (L85/B10): 50000 h. (tq+25°C)
Photobiological safety RG0, risk exempt, in compliance with IEC 62471, IEC/TR 62778.
Mechanical characteristics
Self-extinguishing V2 polycarbonate housing, injection moulded, RAL 7035 grey.
Ecologic anti-aging injected sealing gasket.
Gear-tray reflector unit in hot-galvanized steel, painted in white polyester, fixed to the housing by means of steel rapid devices, hinged opening.
Diffuser in self-extinguishing V2 polycarbonate, photo-engraved interior, UV stabilised, injection moulded with smooth outer surface.
Snug fit safety snap-lock clips for diffuser mounting in stainless steel, screwdriver opening.
Fixing brackets in stainless steel.
Electrical characteristics
In compliance with EN 60598-1.
L-N-E line terminal block with ceramic isolator protection powder-filled fuse, rapid type, 5x20 mm, of suitable capacity, breaking capacity 1500 A.
Solid single-core silicone rubber insulated wiring cable with fiberglass braid type UG4T2/2 cross section 0.75 mm².
Source characteristics
  • Linear LED modules UR95.
  • Color initial tolerance (MacAdam): SDCM 3.
On request
  • different colour rendering indices and colour temperatures
  • linear LED modules, with special protection against aggressive chemically-volatile substances, for standard LED technology
  • power supply conforms to EN 60598-2-22, (high-risk areas excluded) with fixture downgraded UR90 and reduced temperature range
Applications
Cells with temperature from -30°C to + 40°C with a humidity degree up to 95%.
Before installation, we recommend checking that there are no contraindications to the use of and polycarbonate inside the refrigerating room.
For applications in environments in which disturbances on the power network may be present and/or involve use at low temperatures, surge protection devices should be fitted on the power supply and any causes of undervoltages eliminated.
Luminaires suitable, from a hygienic point of view, for use in production plants in the food industry (HACCP / IFS / BRC-Standard).
Installation
Thanks to new 3F LED technology, the advantages of using 3F Linda LED ICE technology are manifold:
  • switch-on time less than 5 seconds
  • unlimited on cycles
  • lifetime of LED source does not decline in relation to the number of on cycles
All this results in cost reductions thanks to:
  • power consumption lower than for fluorescent versions
  • no heat transfer from the luminaire to the cooled environment
Pair of brackets and hooks in stainless steel, with nuts and bolts for fixing to 3F Linda, for ceiling or wall-mounting, single and twin-lamp luminaires.
Minimum tilt angle = 45°.
Code
Item
A0449
15 GZI (w/brack. Linda L300)
A0450
15 RIT (w/brack.+ hooks Linda L660-1270-1570)
Pair of brackets and hooks in stainless steel, with nuts and bolts for fixing to 3F Linda, for wall-mounting, single and twin-lamp luminaires.
Code
Item
A0451
15 MBI (w/brack. Linda L300)
A0452
15 FBR (w/brack.+ hooks Linda L660-1270-1570)
Pair of stainless steel hooks for suspended installation, with cable clip and nuts and bolts for installation to 3F Linda.
Code
Item
A0462
13 GSI (pair of susp. hooks Linda L300)
A0463
13 TRM (pair of susp. hooks Linda L660-1270-1570)
Wire-guard for applications in dry environments, against shocks coming from any directions, galvanized steel rod Ø 5 mm.
Code
Item
A0455
Wire guard 180x1330 03F/Linda
Installation instructions
Download IMI0191000.pdf
A0456
Wire guard 180x1330 03F/Linda
Installation instructions
Download IMI0191000.pdf
A0457
Wire guard280x1330 03F/Linda/Beta
Installation instructions
Download IMI0192000.pdf
A0458
Wire guard 280x1630 03F/Linda/Beta
Installation instructions
Download IMI0192000.pdf
Only for luminaires fixed without hooks.
5-pole cascade connection line, stiff cable H07 V2-U, HT 90°C, 1.5 mm², terminal blocks with connection capacity 2x2.5 mm².
Code
Item
A0447
3F Linda though line L1570
Anti-condensation diffuser cable gland.
Code
Item
A0187
Anti-condensation cable gland
Recommended for installations in environments with temperature sudden changes or subject to condensation.
Pictograms for warning signs to be applied on emergency luminaire's diffusers 160 mm wide.
Pictogram, 135 mm high, 240 mm long for L300 luminaires, 605 mm long for L660 luminaires.
Pictograms complying with European standards concerning health and safety signals on the workplace.
Code
Item
A0464
26 CSG (pictogram P1 Linda L300)
A0465
26 MTH (pictogram P1 Linda L660)
Pictograms for warning signs to be applied on emergency luminaire's diffusers 160 mm wide.
Pictogram, 135 mm high, 240 mm long for L300 luminaires, 605 mm long for L660 luminaires.
Pictograms complying with European standards concerning health and safety signals on the workplace.
Code
Item
A0466
26 DVI (pictogram P2 Linda L300)
A0467
26 MVL (pictogram P2 Linda L660)
Pictograms for warning signs to be applied on emergency luminaire's diffusers 160 mm wide.
Pictogram, 135 mm high, 240 mm long for L300 luminaires, 605 mm long for L660 luminaires.
Pictograms complying with European standards concerning health and safety signals on the workplace.
Code
Item
A0468
26 GZM (pictogram P3 Linda L300)
A0469
26 PXN (pictogram P3 Linda L660)
Instruments
lightUpdate
The information, at the speed of Light.
Subscribe to lightUpdate to keep in touch with 3F Filippi: news, events and product news delivered to your mailbox.
Head office and factory
Via del Savena 28, Z.I. Piastrella
40065 Pian di Macina, Pianoro (Bologna), Italy
Tax Code. 01033260371 - VAT no. IT00529461204
Share Capital € 3,000,000 fully paid up
Bologna Register of Companies no. 01033260371
REA (economic administrative index) No. 234613

e-Mail: 3f-filippi@3f-filippi.it
Telephone: +39.051.6529611
Fax: +39.051.775884
Group
Social
lightUpdate
The information, at the speed of Light.
Subscribe to lightUpdate to keep in touch with 3F Filippi: news, events and product news delivered to your mailbox.
Cookie information
ACCEPT
This site uses only technical cookies, including third-party cookies, and does not use any profiling cookies.
In order to access the site, it is necessary to consent to the use of cookies by clicking on the "Accept" button.
For more information on how we use cookies and how to remove them, see our cookie policy.