Press Area
en
Insert login and password to be identified
Remember me
Enter
Applications
 | 
 | 
3F Linux
 | 
3F Linux S | IP54
Models
Characteristics
Accessories
3F Linux S | IP54

All product codes include the support structure and cover element.
In the L3556 versions there is also an IP54 element that is used to protect the joins between the covers.
Code
Item
Dimensions
L x A x H
A20726
NEW
3F Linux system 5P IP54 L1778
1778x62x38
A20724
NEW
3F Linux system 7P IP54 L1778
1778x62x38
A20725
NEW
3F Linux system 5P IP54 L3556
3556x62x38
A20723
NEW
3F Linux system 7P IP54 L3556
3556x62x38
This fixture makes it possible to create light channels with IP54 protection.
Construction characteristics
Mechanical characteristics
Hot-galvanized wired structure, painted in polyester base white, obtained through rolling process, with expanded EPDM rubber profiles.
Linear connecting element in hot galvanized steel with gasket for the formation of continuous channels, standard on L3556 versions (optional for other lengths).
Transparent polycarbonate IP54 cover element with methacrylate flexible parts.
The L3556 versions have a locking collar for joining the covers.
For the completion accessories see accessories.
Electrical characteristics
Supporting structure with 5 or 7-pole through power supply lines with H07Z-U Halogen Free cables (2.5 mm² HT90 cross-section), equipped with quick connection start/end channel terminal blocks, non-reversible with intermediate power sockets.
2 sockets for 3556 mm structures, 1 socket for 1778 mm structures (5P=N/T/1/2/3, 7P=N/T/1/2/3/+/-).
Feeding input on top at the beginning of the structure or at end cap.
On request
  • structure and accessories in different RAL colors
  • through-wiring up to 11 poles
Applications
Dry, dusty indoor environments, subject to occasional water splashes.
Virtually in all environments compatibly with the use of any chemicals which could compromise the use of plastic materials.
Not suitable in environments where chlorine fumes, ligroin, hydrocarbon mixtures, mineral oil vapours or fumes of lubricating emulsions to cool down machine tools are present.
Not suitable for installation on surfaces subject to important vibrations, exposed to weather conditions, on ropes or poles.
For specific applications please contact our technical offices.
Installation
Ceiling mounted or suspension installation.
Attention: to obtain a light system with IP54 protection rating, it is necessary to use 3F Linux L light modules (or alternatively IP54 closing top) + closing terminals.

Free-position invisible sliding bracket with regulator in stainless steel.
Code
Item
A20450
Sliding bracket with regulator for suspension installation
The suspension cable must be made of galvanized steel with 49 elementary wires of minimum 1.5 mm diameter (for a weight of 15 kg) and 2 mm (for a weight of 25 kg).
Free-position sliding bracket in stainless steel.
Code
Item
A20451
Sliding bracket for ceiling installation
Free-position sliding bracket in stainless steel.
Code
Item
A20453
S-shaped chain hook with sliding bracket 3F Linux
Supplied with S-hook for galvanized steel chain.
Safety screw for locking the sliding bracket, made of hot galvanized steel.
Code
Item
A20474
Safety screw for locking the sliding bracket
These accessories must ALWAYS be used with one of the following codes: A20450 - A20451 - A20453.
Hook to suspended luminaires to a chain.
Code
Item
A20452
Stainless steel hook for chain
Suspension without controller, galvanized steel cable 1.5 mm diameter, load 15 kg.
Code
Item
A20485
NEW
Susp. without adjustment for Linux/HD - 0,5 m
A20486
Susp. without adjustment for Linux/HD - 1 m
A20487
Susp. without adjustment for Linux/HD - 2 m
A20488
Susp. without adjustment for Linux/HD - 3 m
A20489
Susp. without adjustment for Linux/HD - 4 m
A20490
Susp. without adjustment for Linux/HD - 5 m
A20491
Susp. without adjustment for Linux/HD - 6 m
Caddy hook to create a point from which to suspend the system or the loads to false ceilings with visible profiles.
Code
Item
A02562
Caddy for exposed profiles of 24 mm
To be installed on exposed profiles (width 24 mm) of false ceilings.
We recommend reinforcing the false-ceiling fixing at the point where the Caddy is to be installed.
Supplied complete with nut and washer.
The suspension must be purchased separately.
Galvanized steel cable, diameter 1.5 mm, composed of 49 wires.
15 kg capacity (ratio 5:1).
Code
Item
A0716
Coil galvanized cable diam. 1.5mm - 100m
The pack contains 100 metres.
A0717
Coil galvanized cable diam. 1.5mm - 500m
The pack contains 500 metres.
A0718
Coil galvanized cable diam. 1.5mm - 1000m
The pack contains 1000 metres.
Clamp in nickel-plated brass suitable for fixing and adjustment of galvanized steel wire (diameter 1,25 mm - 1,5 mm - 2 mm), complete with locking screws.
The 2 hole clamp allows to block and adjust the cable on a bearing element (part of the building) or on rounded eye bolt.
Code
Item
A0714
Clamp 2 holes - 100 pcs
The pack contains 100 pieces.
Clamp suitable for fixing and adjustment of galvanized steel wire (diameter 1.5 mm), with quick adjustment through unlock buttons.
The clamp with 2 holes allow to fix and adjust the cable on the carrier structural element (belonging to the building) or with eye screw fixing.
Code
Item
A0659
Adjustable clamp 2 holes - 10 pcs
The pack contains 10 pieces.
New
IP54 high closing top, with a length of 1778 mm that can be cut to 889 mm, made of impact-resistant white PVC.
Code
Item
A20743
NEW
Closing Top IP54 - L1778
Electric cable support.
One every 50 cm is recommended.
Made of polycarbonate.
Code
Item
A20475
3F Linux Cable Support (10 pcs)
The pack contains 10 pieces.
New
Closing end 3F Linux S IP54, made of white polycarbonate.
Code
Item
A20740
NEW
IP54 3F Linux end terminal
New
IP54 end terminal with a power-supply line entry hole.
Code
Item
A20741
NEW
IP54 3F Linux end terminal with 1 hole
New
IP54 end terminal with two power-supply line entry holes.
Code
Item
A20742
NEW
IP54 3F Linux end terminal with 2 holes
Quick connection non-reversible plug-socket terminal block, for connection to the power line at the start or end of the channel.
Code
Item
A20454
5-poles socket-pin terminal block 3F Linux S
A20455
7-poles socket-pin terminal block 3F Linux S
Accessories not compatible with 3F Linux S-NL (cod.: A20011, A20012).
Quick connection non-reversible plug-socket terminal block, for connection to the power line at the centre of the channel.
Code
Item
A20500
Central feeding 5-poles socket-pin terminal block 3F Linux S
A20501
Central feeding 7-poles socket-pin terminal block 3F Linux S
Accessories not compatible with 3F Linux S-NL (cod.: A20011, A20012).
Connection to the earth, by means of galvanized M5 screw and nut, for Ø 6 mm hole at the end of every structure.
Code
Item
A0490
Connection to the earth
New
Extension cord to connect some light modules interspersed with blind covers with a length of 889 mm (contact our technical department).
Code
Item
A0801
NEW
Electric extension with 3F Linux plug DALI-EP
A0802
NEW
Electric extension with 3F Linux plug
Attention: the code A0801 is supplied with a 5-pole electric line, while the code A0802 is supplied with a 3-pole electric line.
Instruments
lightUpdate
The information, at the speed of Light.
Subscribe to lightUpdate to keep in touch with 3F Filippi: news, events and product news delivered to your mailbox.
Head office and factory
Via del Savena 28, Z.I. Piastrella
40065 Pian di Macina, Pianoro (Bologna), Italy
Tax Code. 01033260371 - VAT no. IT00529461204
Share Capital € 3,000,000 fully paid up
Bologna Register of Companies no. 01033260371
REA (economic administrative index) No. 234613

e-Mail: 3f-filippi@3f-filippi.it
Telephone: +39.051.6529611
Fax: +39.051.775884
Group
Social
lightUpdate
The information, at the speed of Light.
Subscribe to lightUpdate to keep in touch with 3F Filippi: news, events and product news delivered to your mailbox.
Cookie information
ACCEPT
This site uses only technical cookies, including third-party cookies, and does not use any profiling cookies.
In order to access the site, it is necessary to consent to the use of cookies by clicking on the "Accept" button.
For more information on how we use cookies and how to remove them, see our cookie policy.